A review of the Airpura C600 purifier review
When you consider the Airpura C600 features you find that it has a large 3 inch activated carbon bed. This is extremely effective in being able to receive every possible kind of gaseous chemical contaminant and VOCs. The carbon filter is specifically made extra deep in order to ensure that there is an enhanced purification of the air. This also takes a further contact time to bring about a far longer increase in the absorption of the carbon media.
A Hepa grade post filter is able to remove all the possible airborne particles.
The Airpura C600 has a powerful speed fan, with a power of 560 cubic foot per minute. This has the specific objective of being able to reduce the noise and movement. There are felt gaskets to prevent the contamination. The other competitors in the market go on to use rubber seals that cut off gas VOCs. This series is the one that comes with the highest air processing rates in the field. At the same time one really needn’t worry about the noise level from the fan. The noise level emitted by the Airpura C600 is far less than its competitors.
The uses of the Airpura C600:
It can be the best for people who are overly concerned about the kind of air that they breathe. If you want to stop the inhabitants of the house from breathing gaseous contaminants, pollutants, allergens and chemicals and have clean smelling air all around you, then the Airpura C600 is a must buy.
The benefits of the Airpura C600:
· The large carbon bed ensures that there is a complete filtration and removal of gases, chemicals and odors.
· It has an amazing capacity of being able to remove all the contaminants at an air processing rate of 560 cf per minute.
· The fan speed is fast and yet it does not emit any noise. It is far quieter when compared to the Austin Health mate.
· The air purifier comes with the best design
· The Hepa and carbon filters are different and therefore, can be changed differently too.
· There is no lifetime warranty on the air purifier.
· The Hepa filter is quite small and therein might not be able to trap all allergens and pollutants.
Further specifications about the Airpura C600 are that it is a multi-stage progressive air filtration process. It has along with it a pre-filter as well as micro-suppress filters. The large activated carbon filter in the Hepa post-filter is what is installed in it.
The Airpura C600 can cover a range of 560 cubic feet per minute. That is an area of 700 square feet in an hour and 2100 square feet in 2 hours.
The fan type that is used in the Airpura C600 is centrifugal and can be operated at different speed controls.
The amount of Hepa is at 306 square inches. The amount of carbon is at 26 pounds. The air intake is at 360 degrees and the power consumption is 120 watts that too when the fan is set high.
The size of the Airpura C600 is 23 inches in height and 15 inches in diameter. It weighs 49 pounds. The noise level is under control, the highest noise level is 62.3 dba and at the lowest range it is 28.1 dba. The material that it is made up of is all steel and with a powder coat finish to it. The Airpura C600 is available in three different color options.
The pre-filter lasts for one year, the carbon filter for two years and the Hepa filter for a year. The Airpura C600 has been approved and it meets all the safety parameters. It comes to the buyer with a one year manufacturer warranty.
The Airpura C600 also has other features to it such as felt sealing gaskets easy filter access, and caster wheels too.